OTTOVAC is a portable electric vacuum lifting device intended to lift and move glass and any other material that has a smooth, flat and non-porous surface. 

The OTTOVAC has a built-in pressure sensor with an automatic start/stop function. When the vacuum in the base of the suction cup reaches -55 kPa, the pump will automatically stop after a three-second delay. When the vacuum level drops below -55 kPa, the pump will automatically restart, reaching the required pressure during operation.

The OTTOVAC has been tested to a load capacity of 200 kg, with a safety factor of 2:1 it has a stated maximum load capacity of 100 kg WLL.

The suction cup is powered by 4 AA batteries.

Specifications

Model/SKU OTTOVAC-V1

Battery Alkaline AA 1.5 V (x4)

Working voltage 6 V

Rated power 6 W

Rated air flow 4 l/min

Maximum vacuum rate -0.7 bar (-70 kPa)

Maximum lifting capacity     200 kg (440lbs)

Dimensions         240 x 220 x 95 mm

Net weight (with battery)    1.2 kg (2.6 lbs)

Working temperature          0-60°C (32-140°F)

Compliance with EU regulations

According to the Machinery Directive 2006/42/EC.